Submitted by: Dave Rokiki

A home bar is an area within the home that will prove to be the focal point of any socializing. This is due to the fact that it is a gathering place for people to have an alcoholic and a non-alcoholic drink. Subsequently people will congregate at this focal point and will naturally engage in conversation, the telling of jokes and the sharing of life experiences and stories.

Consequently, when people enjoy their beverage at this oasis they generally like it to be cool and refreshing. Therefore, it is important, when thinking about investing in a home bar, to consider what type of refrigeration will be utilized. This refrigeration could be provided by a basic refrigerator, use of a wine refrigerator cooler or ice cubes.

First of all, the basic refrigeration to maintain the coolness of the drinks or bottled beverages would be through the use of ice. This ice can be taken from the freezer space located within a refrigerator in the kitchen and stored in a separate thermos area in the bar area. Therefore, if an individual uses ice cubes for their beverage, then the bartender could simply draw ice cubes from the ice chest to cool down the drink.


Another way to ensure that guests have iced drinks is to install an icemaker in the bar itself. This is not as difficult a task as it seems. There are small and portable icemakers on the market that can be purchased and placed under the home bar counter. Happily, such icemakers do not require a drainage system, so plumbing is a non-issue.

Another way to keep drinks cold, particularly beers and soft drinks would be to have a portable refrigerator either in the bar or near it. These small electrical units can be easily found for purchase and fit nicely in most home bars.

You also might think about a wine refrigerator. This particular appliance exists to keep wine at the proper temperature for the enjoyment of the wine drinkers among your guests.

Specifically, the wine can be placed in the refrigerator on its side as the shelves are designed to accommodate wine bottles. There are different sizes of wire refrigerators that can be purchased and the size decided upon is dependent upon the number of bottles of wine that you would like to have chilled at any given time. The beauty of a wine refrigerator is that it is specifically designed to maintain the optimum temperature as recommended for wine cooling.

If you have an outdoor home bar, a cooler will do the job of keeping drinks cold very nicely. This cooler could be in the form of a large ice chest which could hold ice cubes or a smaller stainless steel cooler to chill a bottle of wine or a couple bottles of beer. A stainless steel cooler in the shape of a bucket would add a touch of style to any outdoor party. Generally, ice can be easily purchased for little money from convenience or grocery stores and come in 10 and 20 pound bags.

About the Author: For more information on

skinning a bar

or to get your

free home bar plans

check out Bar Plans Online.


Permanent Link:

byAlma Abell

Your heating and cooling system plays an important role in your overall comfort level within the home. For this reason, you must take care when choosing an HVAC contractor to install a new system or one to maintain and repair the system you currently have. Don’t hesitate to ask friends and family for references and do some research into various contractors. Before you actually hire a contractor though, you want to ask them a number of questions to ensure they will be of assistance in the installation, maintenance and repair of your heating and cooling system. Discuss the following items with each contractor you are considering hiring before you make your final decision.

1. How did you determine the amount of heating and cooling power needed for my home? The contractor should be able to explain how the determine the load calculation and what size equipment will be needed for your home. This is of great importance as a system which is too small or too large won’t efficiently heat and/or cool the home.

2. How many zones will my home need? In certain homes, additional thermostats may be needed to properly heat and cool the home and keep all occupants comfortable. The contractor should explain the various options to ensure the whole house is comfortable.

3. Will the equipment used be Energy-Star qualified? This designation means that the air conditioning or heating unit meets minimum performance and efficiency standards as outlined by Energy Star. Over time, choosing a product that meets these standards will save you money in the long term.

4. What did you find while doing as assessment of my current system? The contractor should be able to tell you if any repairs need to be made to the ductwork to ensure they can handle the airflow adequately. In addition, they should check new refrigerant lines on the air conditioner as failing lines can lead to environmental hazards.

Never hire a contractor without obtaining a second opinion to ensure you are being given the correct information. Many recommend you have a minimum of three contractors come out and check the system to see if they are in agreement as to what needs to be done. When you do choose an HVAC contractor, demand everything be putting in writing for your own protection.

byAlma Abell

Your AC Company in Lubbock is here to help, but it is up to you to decipher the signs of when you need to hire the professionals. A broken cooling system is the last thing anyone wants, especially on a day with high temperatures. An informed AC owner can prevent this sort of discomfort simply by recognizing their need for an air conditioning expert.

Installation is Difficult

While it is very commendable to attempt an AC installation yourself, it is highly recommended that you hire an AC Company in Lubbock instead to assist you for a multitude of reasons. Not only will the professionals be able to finish the process in a timelier fashion saving you your own precious time, but they will also make sure to do it properly. A poor installation job may result in future issues that require more effort and, unfortunately, more money.

Increase in Billing

A need for repair may fly under the radar if it seems your air conditioning is still in working order. However, a higher monthly bill is a strong indicator that your AC is no longer functioning as efficiently as it once was. An AC Company in Lubbock will try their best to discover the problem, fix it, and lower your bill while simultaneously improving the results of your air conditioner for a cooler home.

Stay Up to Date

An unexpected sign that you need to hire an air conditioner repair person is simply time itself. If an extended period has passed without a checkup, it may be time to schedule one. This process allows you to catch any underlying problems that could cause much larger issues down the line. Maintenance is just a small price to pay when trying to prevent costly damage or even complete breakdown that involves the purchase of a brand new system.

Do not sweat when your air conditioner is in need of repair. Your AC Company in Lubbock has the services you need to prevent sweltering on a hot day when you need cooling off the most. Visit for contact information about a repair service near you.

byAlma Abell

Experience in a craft or trade is something that one simply cannot put a price tag on. When searching for a contractor for your home or business, one should first determine how much experience the potential candidate may possess. If you are searching for an experienced air conditioning contractor in Ennis, TX, it is a good idea to give Direct Service Company a call. They offer over thirty years of experience in the industry and you can rest assured that the job will be completed effectively and efficiently. They offer both plumbing and HVAC services and service both commercial and residential customers.


Some of the services offered by Direct Service Company include air conditioning repair and installation including window units, ductwork, inspections and maintenance. They also provide heating services such as installation, repairs, ventilation, thermostats, filters and maintenance. They also offer all aspects of plumbing services from clog repairs to gas lines. Commercial refrigeration services are also available and these include repair and maintenance, installation and the maintenance and repair of chilled water systems. They also offer a variety of maintenance plans which will help to keep your systems running more efficiently. Their technicians are highly skilled and they believe in providing the best in customer service and satisfaction.

Whatever your reason for needed an experienced air conditioning contractor in Ennis, TX, it is a good idea to contact Direct Service Company. They can provide you with the services which are needed to keep your home cool and comfortable. They are affordable in price and are very good at what they do. They offer thirty years of experience in the industry and will be sure to meet and exceed your needs.

To learn much more about what they have to offer, it is a good idea to visit website. You will get a better understanding of all of the services that are provided. One can also gain access to valuable coupons and special promotions that are being offered at that time. They can also help you to lower your cooling and heating costs which can save you quite a bit of money. This is definitely something to consider.

byAlma Abell

Do you have a big clean up project to do, and are in need of something to spray everything down with? If so, you will want to check out some Industrial Pressure Washers Fairfax VA. Pressure washers are handy for a number of reasons. Not only are they convenient, but can also save you time and money. Also, keep in mind that there are different types of pressure washers. Some of them use cold water, while others use hot water. This article will discuss more about the benefits of purchasing a pressure washer.

When deciding on a pressure washer to buy, the first thing that you should do is determine what it is that you will need it for. Remember that pressure washers will typically jet water out at least four times faster than a typical hose. So if you want one just to wash your car with, a regular garden hose would suffice. If you want to clean up a lot of grease and grime, you will want a washer that utilizes hot water. If you are looking to purchase a gas powered pressure washer, those will be for outdoor use only for safety measures. Click here for more details.

Next, pressure washers are of great benefit to you. You will be saving money because you will not have to fork over cash for labor hours. A pressure washer can typically get the job done at least twice as fast than a hose or scrubbing by hand would. Also, you will be able to save water when compared to using a typical garden hose. Finally, when you are cleaning heavy equipment, you will be able to ensure that it gets deep cleaned. This will allow your equipment to run better and last longer.

Finally, Industrial Pressure Washers Fairfax VA are worth their weight in gold. You will be saving yourself both time and labor costs, resulting in more profit for you. The key is choosing the right pressure washer for your needs, whether they are indoor or outdoor. To find out more about what industrial pressure washers are available to you, check out Virginia Industrial Cleaners Equipment for more information.


When you are drinking your favorite carbonated beverage, are you thinking about how it got this way? Probably not, but there is a process involved in providing the fizzling and bubbly effect we enjoy. Manufacturing carbonated beverages is divided into the following processes:

* Carbonation

* Filling and packaging

* Sugar dissolving process

* Deaeration of water preparation

* Preparing and blending all the ingredients

* Thermal treatment

What Is A Carbonation System?

The carbonation system configurations, involve a batch operation, which uses blending tanks or a continuous operation for more volume and advanced production requirements. Other processing solutions, include:

* Beer & Beverage Carbonation – Beer and beverage carbonation is a concise mixing of C02 and N2 gas blending for fountain sodas and beer products, such as ales, lagers, and stouts.

* Chemical Blending – Chemical blending is a chemical process, where organic and inorganic chemicals can be blended. The process involves multi-component blending, homogenization, liquid compounding, intensity and liquid powder combination. Chemical blending is one of the frequent kinds of chemical process which is commonly used in this application. The mixing procedure can potentially save manufacturers time, labor, inventory, and transportation costs. Substance could be blended in liquid form to a variety of pH levels and viscosity. This service consists of multi-component blending, homogenization, liquid compounding, high Intensity and liquid powder combination. This process follows a set formula to a batching collector. It doesn’t require any batching vessels for the finished product in homogenization and each dosing amount is accurately controlled.

* Alcohol Blending and Proofing – Alcohol blending is a specific formulation which dilutes and lightens the tones of alcoholic beverages, like beer, wine, and liquor. Alcoholic beverages are based on fermentation and the process of decomposition of organic materials which contain carbohydrates for proofing. Alcohol blending involves distillation that reduces its water content and increases its strength. Blended alcoholic beverage processes involve color adjustments, flavoring ingredients, and a high-proof ingredient with a low compound content.

* Spray and Membrane Deaeration – All beverages are subject to dissolved oxygen which affects its color, taste, vitamin content and its shelf-life. There are different techniques for water deaeration, such as pressure, vacuum, and a combination of both. A specialized spray-vacuum deaeration system is designed to help reduce entrained O2 and other gasses in process water. This system creates a high vacuum environment, where process water is sprayed. As the process water enters the vacuum tank, it is diffused and atomized to create maximum surface area, allowing the trailing gases to escape the water.

The Best in CarbonationThe Waukesha, Wisconsin, TechniBlend Inc. carbonation system is used by different industries including food and beverage manufacturing, consumer and personal care production, and chemical blending. They are a process engineering and automation control company which designs, engineers, builds, and controls both the equipment and complete plants. Their technological solutions allow for more enhanced efficiency, productivity, and guaranteed quality which ensures a large return on your investments.